Tens of thousands of competitors, pages of hard questions and unsatisfied exam preparation situations… Do not worried about all those annoying things! We, help you with your HCIE H13-629 HCIE-Storage (Written) (Internetwork Expert-Storage) exam. We will assist you clear the H13-629 exam with HCIE H13-629 braindumps. We H13-629 practice tests are the most comprehensive ones.
Visit our site to get more H13-629 Q and As:https://www.leads4pass.com/h13-629.html (364 QAs Dumps)
Question 1:
A hospital bought a Huawei OceanStor 9000V100R001C30 storage device for storing business data. According to the relevant laws and regulations, which of the following descriptions of data loss prevention is wrong?:
A. The engineer has set the WORM root directory according to the hospital\’s requirements, and all the subdirectories under this directory have the WORM attribute.
B. During the file protection period, no one can delete the protected file.
C. Protected Documents are Protected for a Period of 70 Years on Huawei OceanStor 9000 Storage Device.
D. WORM log save root, quota and WORM protection period cannot be set.
Correct Answer: B
Question 2:
True or False, with a client using the SMB 1.0 / 2.0 / 2.1 / 3.0 protocol to perform file replication inside a Huawei OceanStor 9000, it does not need to pass through the client, but can be done directly to the system.
A. True
B. False
Correct Answer: B
Question 3:
Client 1 attempts to read file X from an OceanStor 9000, and node A responds to the read request. Which statements are true about the process of reading file x? (Choose two.)
A. If the system detects that node B has cached file X, client 1 can directly read the file from node B.
B. If the system detects that node B has cached file X, node A can directly read the file from node B.
C. After processing the file read request initiated by client 1, the system retains file X on both node A and node B.
D. If the system detects that node A has cached file X, only data of file X is cached on node A but the parity data is not cached on node A.
Correct Answer: BD
Question 4:
An Engineer installed a OceanStor 9000 for a customer (a total of 5 OceanStor 9000 C Node, front and rear ends are 10GE TOE networking, on-site installation TOE network card). Then connected the signal lines, power lines, and debugged the software. During the installation there were issues. Which of the following description of these issues are correct? (Multiple choice.)
A. 5 devices TOE NIC A0, B1, and A0, B3 inserted into the PCIe slot will not affect the system. Deployment will not affect the network bandwidth, so it cannot be adjusted.
B. The signal cables are long and need to be strapped to the cabinet or placed on the bottom tray.
C. Label NODE 01 A0-0 The signal cable is inserted in the network port A0-1. The signal cable labeled NODE01 B3-1 is inserted in the network position B3-0, due to the same network card two network port peer, you can place the wrong line, you cannot adjust.
D. CE6850 switch connected to two stacked copper cables, one of which is needed to post-cold more cold, because it does not affect the network interoperability. You can base this software debugging.
Correct Answer: BD
Question 5:
A customer deploys a set of OceanStor V3 storage in two cities and adopts asynchronous remote replication networking between the two storage arrays. Which of the following statement is correct? (Multiple choice.)
A. The automatically created Asynchronous Remote Copy snapshot can either be a private quick pick or a public one.
B. In a DR scenario, it is recommended to create a virtual snapshot of the secondary LUN and map it to the host for access.
C. In remote replication link networking, parallel networking is better than crossover networking.
D. The number of LUNs in the consistency group should be as small as possible, and only the LUNs that have write dependencies on the same application are placed in a consistency group.
Correct Answer: CD
Question 6:
There are multiple types of disks in a hard disk domain in the OceanStor V3 storage system. If you add one SAS disk to the hard disk domain, the topology will be load balanced as which of the following?
A. Tier 0 disks perform data equalization.
B. All disks in the entire hard disk domain will participate in data equalization.
C. The CK of the target CKG will be released after data equalization is completed.
D. OCeanstor V3 enables cross-engine data equalization.
Correct Answer: D
Question 7:
Which of the following VMWARE virtual machine scenarios can use VADP backup?
A. The storage is connected directly to the virtual machine, including RDMs, directly to iSCSI or NFS.
B. Virtual machines contain large databases.
C. The virtual machine is deployed in the AIX operating system.
D. Virtual machines contain non-Microsoft family applications.
Correct Answer: B
Question 8:
What commands are used for viewing SCSI controller information on Linux systems with Qlogic HBAs?
A. lspci | grep SCSI
B. cat / proc / scsi / scsi
C. cat / proc / scsi / qla2300 / 1 | grep port
D. lspci | grep Ethernet
Correct Answer: ABC
Question 9:
Maintaining a persistent connection between host and storage, ESXi must support multipathing. Which of the following statements is incorrect regarding multipathing for VMware vSphere 5.5?
A. In addition to path failover, multipathing also provides load balancing. Load balancing is the process of distributing I / O load across multiple physical paths.
B. In the event of a path failover, the virtual machine I / O delays Nintendo pump by 60s.
C. If the failover takes a long time to complete, the windows virtual machine may interrupt the I / O and eventually fail. To avoid this, set the windows virtual machine timeout to at least 30 seconds.
D. When coordinating vmware NMP and any installed third-party MPP, the PSA (Pluggable Storage Architecture) performs load and unload multipathing plug-ins and handles physical path discovery and removal.
Correct Answer: C
Question 10:
In a A VTL6900-I system, the backup server connected to it is the Linux operating system. The backup server and the VTL6900-I system are directly connected through the FC. The server identifies the device information as shown below.
After the backup server is configured as a backup client for the VTL6900-I system and the backup VTL system on the server virtual library process, which the following operation and description is correct:
(Multiple choice.)
A. When configuring the backup client on the VTL side, you need to know that the WWPN of the FC port that connects the VTL to the VTL is available on the server in the sys /class / fc_host directory and subdirectory to the corresponding WWPN port.
B. Server-side identification has been detected with the library device command is cat / proc / scsi / scsi.
C. As shown in the figure, among the devices identified on the server side, the device labeled 1 is the scanned library.
D. As shown in the figure, of the devices identified on the server side, the device labeled 2 is the information for the scanned tape.
Correct Answer: ABC
Question 11:
A customer needs to create an OLAP backup database for batch importing online database data at night. The database software is SQL Server 2008. The data file size is 20 TB. The storage system is OceanStor V3. The stable write throughput is required to reach 1800 MB/s. Which configuration best meets customer requirements?
A. Use 2 TB NL-SAS disks and configure RAID 6 (8D 2P).
B. Use 2 TB NL-SAS disks and configure RAID 5 (8D 1P).
C. Use 600 GB 15k rpm SAS disks and configure RAID 5 (8D 1P).
D. Use 600 GB 15k rpm SAS disks and configure RAID 10.
Correct Answer: C
Question 12:
Which of the following is correcting regarding the read and write performance of the Huawei Oceanstor 9000 node, from highest to lowest?
A. P25 Node SSD Hard Drive> P25 Node SAS Hard Drive> P36 Node SATA Hard Drive> P12 SATA Hard Drive> C36 SATA Hard Drive
B. P25 Node SAS Hard Drive> P25 Node SSD Hard Drive> P36 Node SATA Hard Drive> P12 SATA Hard Drive> C36 SATA Hard Drive
C. P25 Node SSD Hard Drive> P25 Node SAS Hard Drive> P36 Node> C36 SATA Hard Drive> P12 SATA Hard Drive
D. P25 Node SSD Hard Drive> P25 Node SAS Hard Drive> C36 SATA Hard Drive> P36 Node SATA Hard Drive> P12 SATA Hard Drive
Correct Answer: C
Question 13:
Which of the following information about the InfoEqualizer function of Huawei OceanStor 9000 is correct? (Multiple choice)
A. When using the InfoEqualizer function, you need to configure DNS. If you use an external DNS server, when configuring the DNS server, there is a setting of “reverse lookup zone name”, network ID setting in this tab, you need to input network ID in reverse order.
B. When there is a DNS server in the user network, the DNS server in the user network does not need to configure the forwarding record. When the user network without DNS service server, configure the InfoEqualizer DNS IP address as the DNS server\’s address on the client.
C. The root domain name is the domain name InfoEqualizer configured for the cluster. This domain name must be configured as the fully qualified domain name, that is, the domain name that includes the root node.
D. The domain name of the partition is configured as the relative domain name, and the root domain name of the InfoEqualizer is automatically taken as the suffix of the domain name, and the full name of the domain name is formed with maximum support of 32 partitions.
Correct Answer: BCD
Question 14:
You want to improve host write performance on the primary storage. Two sets of OceanStor unified storage with synchronous remote replication are effective in doing this is which of the following ways? (Multiple choice.)
A. RPO does not require 0 for the scenario, it is recommended to use asynchronous remote replication.
B. The main storage using smart cache acceleration, speed up the main storage IO processing speed.
C. According to the service pressure of the LUNs stored on the primary side, assign the home controllers of each LUN to the A and B controllers.
D. If you are using an asynchronous remote replication scheme, you need to design a startup synchronization time based on the RPO metrics and consider the setting possible startup synchronization time during the business.
Correct Answer: ACD
Question 15:
Customers use Redhat Linux enterprise 6 LVM to manage user data disks in the cluster. When using pvmove data migration you can not enforce OK. What is a possible reason for this.
A. Pvmove command does not support Linux cluster.
B. Redhat Linux enterprise 6 version of lvm does not support the pvmove command.
C. You need to install the cmirror package and run it on the cluster server.
D. Need to lvm version down to 1.0 before using pvmove migration data.
Correct Answer: C
Visit our site to get more H13-629 Q and As:https://www.leads4pass.com/h13-629.html (364 QAs Dumps)